Twin needle stitches (option) – Kenmore 15358 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Twin Needle Stitches (Option)
0 stitch selector:
2 to 2.5
@ Presser foot:
Zigzag foot
(3j Needle thread tension:
1 to 4
(4) Needle:
Twin needle (optional item)
NOTE:
Do not set the stitch pattern selector at any
position higher than the middle of 2 and 3, otherwise the
needle may hit the needle plate or presser foot and could
possibly break.
0
Upper thread guide
(2) Check spring holder
(3) Thread take-up lever
(4) Needle bar thread guide
©Twin needle (optional item)
Turn off the power switch. Pull up the additional spool pin.
Piace a piece of felt on the additional spool pin. Make sure
you separate the two strands of thread and slip one strand
through the needle bar thread guide (4)on the ieft and the
other on the right.
Change the needle to a twin needle ®. Thread each needli.
from front to back.
When you want to shift the fabric to change the sevving
direction, you must first raise the needle out of the fabric.
62