Shell tuck, Stretch stitch patterns – Kenmore 15358 User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Shell Tuck

(D stitch pattern selector:

(D Presser foot:

(D Needle thread tension:

(4) Stitch length:

Satin stitch foot

6-8

2-3

Fold the fabric in bias. Sew along the folded edge so that the

needle on the right swing just clear the fold to form tucks.

Open the fold and press the tucks to one side.

(1)

Bias fold

NOTE:

You may need to adjust the needle thread tension to achieve the

best result.

Stretch Stitch Patterns

(D stitch pattern selector:

1-9

(D Presser foot:

Zigzag foot

(D Needle thread tension:

1-4

(4) Stitch length:

If forward and reverse feeds become unbalanced due to the type

of fabric, adjust the balance by turning the stitch length dial as

follows:

If patterns are compressed, turn the dial toward “ L”.

If patterns are drawn, turn the dial toward “ S ”.

(See page 32)