Inserting bobbin – Kenmore 15358 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting bobbin
[T]
Place
a
bobbin in the bobbin case, making sure the
thread feeds clockwise from the bobbin.
I
Draw the thread through the slot of the case.
] Continue to draw the thread under the tension spring
1
and through the opening.
Pull out about 4” (10 cm) of thread.
(1) Tension spring
] Holding the latch open, position the bobbin case into the
shuttle, and then release the latch.
]The case should lock into the place when the latch is
released.
22