Zipper sewing, Fabric preparation, Zipper sewing -40 • fabric preparation – Kenmore 15358 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Topstitching
© stitch pattern selector:
1 -2
(2) Presser foot:
Zigzag foot
(3) Needle thread tension:
2 to 6
($) Stitch length:
1 . 5 - 4
Topstitching emphasizes lines of garments and keeps
seams and edges flat and crisp. Accent suits or blouses
with one or two rows of topstitching around the outer edges
of cuffs, lapels or collars. Lower the presser foot and keep
the edge of the fabric next to the right edge of the presser
foot.
Evenly guide the fabric along the edge to produce an even
row of topstitching 3/8" (1.0 cm) from the edge.
Zipper Sewing
(1) stitch selector:
1
(2) Presser foot:
Zipper foot
(3) Needle thread tension:
2 to 6
(4) Stitch length:
1 . 5 - 4
m
Fabric preparation
(1) Right side (Top side) of fabric
©Wrong side (Bottom side) of fabric
@ Bottom seam
(4)
Zipper stop
position
(5) Basting stitch
Place the right sides (Top sides) of the fabric ©together.
Sew a bottom seam 5/8" (2.2 cm) from right edge ©to
the estimated zipper bottom stop position
(4).
Sew in
reverse a few stitches to lock.
Increase the stitch length to 4, set needle thread tension
to 0, and sew a basting stitch® the entire length of the
zipper opening.
38