Note, Darning – Kenmore 15358 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Darning
©stitch pattern selector:
1 - 2
(2) Presser foot:
Removed
(3) Needle thread tension:
1 to 4
(4) Stitch length:
Any
©Feed dogs
Dropped
Drop the feed dogs (see page 34) and remove the presser
foot. Center the hole in the fabric on an embroidery hoop,
as shown. Lower the presser bar and sew at a slow speed.
Move the fabric back and forth slowly until the darning area
is covered. Turn the fabric a 1/4 turn (90°), and sew
another layer of stitching over the first layer.
NOTE:
If the fabric is thin or badly damaged, use a separate
piece of fabric under the hole to reinforce it.__________
42