Stitch pattern selector, Stitch length control, Stitch pattern selector stitch length control – Kenmore 15358 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stitch Pattern Selector
(1) Setting mark
(2) Stitch selector
C3) Stitch length control
Raise the needle above the fabric.
Turn the dial to select the desired pattern.
NOTE:
To avoid needle or fabric damage, make sure
the needle is up and out of the fabric while
selecting a stitch.
Stitch Length Control
Turn the stitch length control to the setting mark at the desired
stitch length.
The higher the number, the longer the stitch length.
® Setting mark
• “ I—I ” is the recommended setting for buttonhole stitching.
• Adjust the stitch length control in the 0.5-4 range when you
sew the zigzag stitch.
• Set the stitch length control at “ ^ ” to sew the stretch stitch
pattern sewing.
• If the stretch stitch pattern is uneven, turn the stitch
length control in the direction of "S" to compress it, or “L” to
expand it.
32