Brother 2500ML - Manual (Page 91)

mowTOJJSEIHf^PY^lJNCTI
8. HOW TO USE THE COPY FUNCTION
Making Single and Multiple Copies
Use this function to make a single copy or multiple copies.
1. Insert the documents face down
into the feeder.
2. Press COPY.
3. Enter two digits for the number of
copies you want using the number
keys (Max. 99 copies).
Example; 05
4, Press COPY or just wait for 5
seconds.
STATUS OF LCD DISPLAY
1 ag4J 15
^
{
FA
m
№ ■ & Ig TA RT )
^ iiijfl-iiiii...........:-Flig#wippyiJ
^ p NOrOF COrl ESTTQl i
^ ...................... .....^
[:.mvPn::::M.giySrttS::; /1
( -CPBY:' STACK: f
:)
3
Helpful Hints 1. Set the resolution to either PHOTO or FINE. If you select STANDARD or S.
FINE, the resolution will automatically change to FINE. However, if you have
an outgoing document in memory and you haven’t selected the PHOTO
setting, the resolution may automatically change to STANDARD regardless
of the setting you selected.
2. When you want to change the resolution for each page, you can use Function
menu 1-5 (see page 6-14) to set the resolution for each page.
3. When you want to make a copy, make sure the text or image on the original
document is not too close to the edge. Your fax machine cannot read anything
closer than 4 mm (1/8 inch) from the edge.
4. Do not pull on the paper while copying is in progress. This may distort the
copied image and damage your machine.
NOTE: 1. When making Multiple Copies, do not let the receiving tray overstacked. Remove
copied paper from receiving tray frequently.
2. When making Multiple Copies, make sure there is enough recording paper in the
machine.
3. Original documents should be straight, non wrinkled, to be correctly fed. Otherwise
the documents may occasionally jam.
8-1