Brother 2500ML - Manual (Page 40)

tLtKMUINt hUINUIIUN bhi lINGS
wms±.: -......................... -saS:“SNSEiiNs ■ ^
§■■■■
4. TELEPHONE FUNCTION SETTINGS I ^
s:-:^
There are some settings, such as the date and time, you should make to your fax machine before
you begin using it. Once entered, these settings will remain in the machine until you change them.
You can begin customizing the settings by pressing
FUNCTION on the control panel. This
activates the function mode and On - Screen Programming prompts. You can complete a variety
of settings in this mode.
Setting the Dialing Mode (TonelPulse) _______ _________
Your fax machine supports both tone (or multi-frequency) and pulse (or rotary) dialing. It is
initially set to TONE, so you do not need to change the setting if you use that kind of line. If you
are using a pulse dial line, you can change the setting to PULSE by following the steps below;
1. Press FUNCTION.
You will see scrolling options on the dis­
play. You can choose one.
2. Press 6
.
3. Press 1.
After two seconds you will be automati­
cally prompted to select pulse or tone.
4. Press (left arrow) or (right
arrow) to find the dialing mode
that matches your telephone line.
Example: PULSE.
5. Press SET.
6. Press STOP to return to the date
and time.
STATUS OF LCD DISPLAY
f : g i / o a/1,9 O P i Mh
f1 . IFMP.SEH INGS )
f FLL OPTIONS
c
fe.
( D'IWI-|№G.... .... TQENiEr :r PT]
y ^EtreT;>;'^ ,:SElO
( giyitMi PiitS E
!)
r i _-.IO ne / pulse ‘
Setting the Beeper Sound Level
If the beeper setting is LOW or HIGH, it will “beep” every time you press a key, make
or at the end of sending or receiving a fax.
an error.
The initial setting on your fax machine for the beeper is LOW. If you do not want the beeper
select OFF, and if you want it loud, select HIGH.
on.
4-1