Fmm -to ush pi^©r/^pi, And help key – Brother 2500ML User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fmm -to USh
PI^©R/^PI
1
# AND HELP KEY
ilil:
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
4. CONTRAST
There are three types of contrast settings.
Usually the AUTO setting is acceptable. But
if you want to send an especially light or dark
document, you should change this setting.
AUTO: Default setting is AUTO. Contrast
setting always reverts to AUTO after
one transmission.
S. LIGHT; To send very light documents.
S. DARK: To send very dark documents.
AUTO
6-3
1.TEMP.
(TEMPORARY)
SETTINGS
5. RESOLUTION
If you need to send a set of originals at
various resolutions, this function will allow
you to set the required resolution page by
page. (If all documents are the same
resolution, use the RESOLUTION key. See
page 2-5 #21.)
STANDARD/FINE/S. FINE/PHOTO
STAN
DARD
6-14
6. OVERSEAS
MODE
If you have trouble when sending overseas,
you may want to set OVERSEAS MODE to
ON.
ON/OFF
OFF
6-13
7. COVERPAGE
An automatic Cover Page will allow you to
send details of who the fax is going to, who it
is from and when it was sent. ON/OFF
OFF
6-18-19
2. CANCEL
JOB
If you wish to cancel a job that has been set
with the timer, a polled job etc., use this
function.
/
/
/
6-12
3. PRINT
REPORTS
See page 12-1 for
a list of reports.
You can print several different lists and
reports, which are available under function
item 3. PRINT REPORTS.
/
/
12-1-5
4. SET AUTO
1. ONE-TOUCH
DIAL
If you register names and numbers on One-
Touch dial keys, you can dial a number
automatically just by pressing a One-Touch
key. (Max. of 15 locations for FAX-2300ML,
30
locations
for
FAX-2400ML
and
40
locations for FAX-2500ML)
—
4-4-5
DIAL
2, SPEED-DIAL
If you register names and numbers as Speed-
Dial numbers, you can dial a number
automatically just by pressing SPEED DIAL
and a two-digit number. (Max. of 45 locations
for FAX-2300ML, 30 locations for FAiX-
2400MLand 100 locations for FAX-25 OOML)
4-6-7
3. SETUP
GROUPS
This is used for setting up a group number
used for broadcasting.
—
--------------------- ----------------------------
—
4-8-9
3-3