Brother 2500ML - Manual (Page 31)

MUVV IU
.. ■■■"" Y ‘ . I, ■■■,
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. SMOOTHING
Smoothing enhances the appearance of
incoming faxes.
If you set SMOOTHING to ON, you will
receive
messages with the smoothing
enhancement.
ON/OFF
ON 7-4
2. BEEPER
Y ou can adjust the volume of the beeper with
this function.
OFF/LOW/HIGH
LOW 4-1-2
3. COVERPG
ON/OFF
If you set CO VERPAGE to ON, you can send
your documents with a Cover Page generated
by your machine. When the COVERPAGE
setting is ON, you can select a Cover Page
comment.
ON/OFF
OFF 6-17
5. USER
4. GRAY SCALE
You can select a GRAY SCALE level.
16/32
32 6-15
OPTIONS
5. ERROR RE-TX
If you set ERROR RE-TRANSMISSION to
ON, the machine automatically resends the
page once an error occurs.
ON/OFF
OFF 6-21
6. REDUCTION
You can avoid having your incoming data
separated by printing a reduced copy of the
incoming document. The reduction methods
are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
AUTO 7-6-7
7. RCD PAPER
You can select one of 3 sizes of recording
paper. The machine will automatically adjust
the size of the incoming document or original
document so that it fits the paper size you
have selected.
LETTER/LEGAL/A4
LETTER. 7-5
8. TONER SAVE
You can extend the life of the toner by
conserving its use.
ON/OFF
OFF 7-8
6. TEL
1. TONE/PULSE
There are two different dial types and you
must select the type of signal suitable for
your telephone line.
TONE/PULSE
TONE 4-1
OPTIONS
2. RING DELAY
The number of rings before the fax machine
answers the call when in F/T or AUTO '
Answer Mode.
0/1/2/3/4 rings
2 7-2
3-4