ALTANA Haze-Gloss Manual User Manual

Page 24

• delete key
deletes last reading.

The counting variable n is reduced
by 1. The last reading can only be
deleted if no other function has been
called after the last measurement.

• results key
deletes the complete
measurement series of
the set geometry.

DELETE
Delete last value

-->DELETE

Delete statistics

-->RESULTS

Escape:

SAMPLE

Note

Measurement values in the statistic
mode are stored and are protected
when changing the geometry or using
the sample mode.
haze-gloss can store a series of up to
600 measurements per geometry.
These data can be transferred to a PC
via RS 232 interface.
If the geometry is changed in the
statistic mode, the values of the last
measured series are displayed and the
series can be continued if required.
During a running measuring series in
the statistic mode the calibration must
not be changed (compensation, mirror
gloss, customer-specified) since this
would falsify the statistical results.