KEYENCE SL-VH1S - Manual (Page 27)

2-11
Basic Operat
ion
2
SL-VH1S-NO2-E
2-7
Uploading the Configuration to the SL-V
The configuration created with the can be applied to the SL-V by uploading it.
Always upload the configuration again whenever the main unit is replaced.
• When the model configuration of the sub unit is changed after uploading the configuration,
SL-V may not startup (lock-out) depending on the configuration. In this case, reconfigure the
model configuration, and upload it again.
• Uploading is possible only when logged in. "2-6 Login/Logout" (Page 2-10)
• Uploading of the configuration is not possible when the configuration of the main unit
performed on the [System] is different from connected the SL-V.
• Uploading of the configuration is possible even if the configuration of the sub unit performed on
the [System] is different from the SL-V. However, it cannot startup if the Muting area
configuration or Blanking area configuration is configured. (If will go to lockout condition.)
1
Press the [Upload] button in the toolbar.
The [Warning] dialog is displayed.
Original configuration in the SL-V will be discarded when the configuration is sent. Read out the
configuration from the SL-V prior to uploading, and save it as needed.
"4-3 Loading Configurations from the SL-V" (Page 4-5)
"2-8 Saving and Using the Configuration on the PC" (Page 2-13)
2
Click the [Yes] button.
First page of the [Upload] dialog is displayed.
Important
Note
Note