KEYENCE SL-VH1S - Manual (Page 25)

2-9
Basic Operat
ion
2
SL-VH1S-NO2-E
2-5
Setup of the Password
Initial configuration of the SL-V password is necessary before uploading to the SL-V for the first time.
Be sure to keep the password in a safe place and do not forget it.
If you forget the password, configuration cannot be uploaded, initialized, or changed.
• Initial configuration of the password is only possible when the SL-V is connected.
• Initial configuration of the password is not possible if the password is already configured on the
SL-V or the .
• To change the configured password, refer to "4-6 Changing the Password" (Page 4-8).
1
Select [Authorization]
 [Init Password] from the menu.
The [Initial Password setting] dialog is displayed.
2
Enter new password with 4 digit single byte numerals.
Enter the same password in the [New Password (confirmation)].
"0000" cannot be used for the password.
3
Click the [OK] button.
Password will be setup at the SL-V.
Password can be changed later. "4-6 Changing the Password" (Page 4-8)
Important
Note
Note
Reference