KEYENCE SL-VH1S - Manual (Page 21)

2-5
Basic Operat
ion
2
SL-VH1S-NO2-E
2-3
Startup and Exiting the
This section describes the method of startup/exiting the .
is started in following method.
cannot be started up twice.
1
Double-click the [SL-V Configurator] shortcut icon on the desktop. If there is not icon on the desktop,
select Start menu  [All Programs (or Programs)]  [Keyence Applications]  [SL-V Configurator].
SL-V Configurator will startup, and Main window and the [Welcome to SL-V Configurator] dialog are displayed.
2
Select the Startup Method, and press [OK] button.
will exit when [Cancel] button is clicked.
Subsequent procedure varies depending on selected configuration method.

When "Download from SL-V" is selected
When "Download from SL-V" is selected, it will startup after reading the configuration from the connected
SL-V.
• Make sure that PC and the SL-V is connected properly with USB cable prior to selecting
"Download from SL-V" and clicking [OK].
• Make sure that the power of the SL-V is turned on.
• If the communication is interrupted before the reading is completed, the configuration will not
be reflected in the software. Read the configuration again by clicking the [Read] button on the
Toolbar, or create a new configuration.
• Configuration information of the sub unit that is read will be the model configuration that was
sent to the SL-V instead of the model configuration of the SL-V itself. (It will display as no sub
unit if it was never sent.) To read the model configuration of the connected SL-V, read out unit
information from the [System] button in the Toolbar.
"4-2 Changing the Type Configuration" (Page 4-3)
Startup of the
Note
Item Description
Download from SL-V This will read the configuration in the connected SL-V.
New This will create a new configuration.
Open This will read the configuration saved in the computer.
Note