Sensor amplifier (slot 1 to 4), Input – KEYENCE DL-PN1 User Manual
Page 7
5
- PROFINET Communication Unit DL-PN1 User's Manual (IB) -
Data I/O communication device map (DL-PN1 PROFINET I/O controller)
DL-PN1 (Slot 0)
Input
Sensor amplifier (Slot 1 to 4)
Input
Address
Bit
Function name
Description
Value
0
0
Reserved for system
-
-
1
Reserved for system
-
-
2
Comparator value property
Stores the comparator value status.
0: Normal
1: Disabled status
“----”, “FFFF”, or “-FFFF”
3
Reserved for system
-
-
4
Reserved for system
-
-
5
Reserved for system
-
-
6
Warning
One of the sensor amplifiers is in
warning state.
0: No warning
1: Warning
7
Error status
Stores the error status of the sensor
amplifiers.
"Types of error and error code"
0: No error occurred.
1: Error occurred.
1
0
External input response 1
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
1
External input response 2
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
2
External input response 3
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
3
External input response 4
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
4
Reserved for system
-
-
5
Reserved for system
-
-
6
Reserved for system
-
-
7
Reserved for system
-
-
2 to 15
0 to 7 Reserved for system
-
-
Address
Bit
Function name
Description
Value
16+7(a-1)*
0
High
ON/OFF of the High state of the
sensor amplifiers is output.
0: OFF
1: ON
1
Low
ON/OFF of the Low state of the
sensor amplifiers is output.
0: OFF
1: ON
2
Go
ON/OFF of the Go state of the
sensor amplifiers is output.
0: OFF
1: ON
3
Reserved for system
-
-
4
Reserved for system
-
-
5
Reserved for system
-
-
6
Reserved for system
-
-
7
Reserved for system
-
-