Access address (slot 1 to 4) – KEYENCE DL-PN1 User Manual
Page 16
14
- PROFINET Communication Unit DL-PN1 User's Manual (IB) -
*1 Functions assigned to the external input request 1 to 4 are as follows:
•
External input request 1: ZERO SHIFT input
•
External input request 2: RESET input
•
External input request 3: TIMING input
•
External input request 4: ADJUST input
Functions assigned to the external input request 1 to 4 can be changed.
Refer to the IB series user's manual.
*2 If the judgment value is correct, the parameter range is
- from - 999.97 to +999.98 (percent mode).
- from - 99.997 to +99.998 (size mode).
In percent mode:
•
When the comparator value is over range, "+999.99" is stored.
•
When the comparator value is under range, "-999.99" is stored.
•
When the comparator value is invalid, "-999.98" is stored.
•
When an error occurs, "+1000.00" is stored.
In size mode:
•
When the comparator value is over range, "+99.999" is stored.
•
When the comparator value is under range, "-99.999" is stored.
•
When the comparator value is invalid, "-99.998" is stored.
•
When an error occurs, "+100.000" is stored.
Access Address (Slot 1 to 4)
180 to
191
Reserved for system
192
Setting error
When the sensor amplifier
setting is abnormal, the
corresponding bit is set.
2byte
WORD
R
bit0
: Reserved for system
bit1
: Slot 1
:
bit15 : Slot 15
193
EEPROM writing
When the sensor amplifier is
reflecting the setting after the
setting change, the
corresponding bit is set.
2byte
WORD
R
bit0
: Reserved for system
bit1
: Slot 1
:
bit15 : Slot 15
194
Laser emission stop status
When the light emission of
the sensor amplifier stops,
the corresponding bit is set.
2byte
WORD
R
bit0
: Reserved for system
bit1
: Slot 1
:
bit15 : Slot 15
Index
(DEC)
Function name
Description
Data
type
Attribute
Value
Index
(DEC)
Function name
Description
Data
type
Attribute
Default
value
Value
0
Reserved for system
1
Zero shift request
DINT
C
2
Zero shift reset request
DINT
C
3
Reset request
DINT
C
4
Error clear request
DINT
C
5
Initial reset request
DINT
C
6
System parameter set request
DINT
C
7 to 9
Reserved for system