KEYENCE DL-PN1 - Manual (Page 26)

- PROFINET Communication Unit DL-PN1 User's Manual (IB) - 24
Appendix
Specifications
The specifications of the DL-PN1 are as follows:
Product name PROFINET I/O Communication Unit
Model DL-PN1
Suitable network PROFINET I/O communication
Ethernet
Compliant standards IEEE 802.3u (100BASE-TX)
Transmission rate 100 Mbps (100BASE-TX)
Transmission medium STP cable or Category 5e or higher UTP cable (100BASE-TX)
Maximum cable length 100 m
PROFINET
Compatible functions
Data I/O communication
Record data communication
No. of connectable
PROFINET I/O controllers
1
Update Time 2 - 512 ms
GSDML version V2.3
Conformance class Conforms with Conformance Class A
Conformance test version Conforms with V2.2.4
Suitable protocols LLDP, DCP
Sensor connection
specifications
Connectable sensors Sensor amplifiers with D-bus support
Number of connectable
sensor units
4 units max.
Indicator lamps
Link/activity indicator (LINK/ACT): Green LED
System failure indicator (SF): 2-color (orange/red) LED
Bus failure indicator (BF): Red LED
Sensor communication indicator (D-bus): 2-color (green/red) LED
Power voltage
20 to 30 V DC, including ripple (p-p)10%
supplied from the connected sensor amplifiers
Power consumption 1500 mW or less (at 30 V 50 mA max.)
Environmental
resistance
Operating ambient air
temperature
-20 to +55°C (no freezing)
Operating ambient air
humidity
35 to 85% RH (no condensation)
Vibration resistance
10 to 55 Hz compound amplitude 1.5 mm, 2 hours each in X, Y, Z
directions
Pollution degree 2
Materials Main unit: Polycarbonate
Weight Approx. 70 g