Elektron Machinedrum User Manual
Page 90
GLOBAL SETTINGS
82
1.
Select the SYNC row in the GLOBAL EDIT menu. Then select CTRL OUT and press
[ENTER/YES].
ON will make the Machinedrum send out MIDI start, stop and continue messages. Use this
setting if you want to control and external sequencer with the Machinedrum. Pressing the
[PLAY] key on the Machinedrum will then start the external sequencer, pressing the
[STOP] key will stop the external sequencer and so on.
OFF means no MIDI start, stop and continue messages will be sent from the Machinedrum.