Elektron Machinedrum - Manual (Page 25)

THE SOUND SYNTHESIS OF THE MACHINEDRUM
17
When you are in either the SAVE KIT or LOAD KIT menus, select the kit you want to copy,
hold down the [FUNCTION] key and press the [RECORD] button. A message saying
“COPY KIT” appears.
8. Use the [UP] and [DOWN] keys to scroll to the slot you want to copy the kit to.
9. To paste the kit into the slot, hold [FUNCTION] and press the [STOP] button. The mes-
sage “PASTE KIT” appears.
• If you want to undo the action, press the [FUNCTION] + [STOP] buttons again. The
message saying “UNDO KIT” indicates that the paste operation has been undone.
CLEAR KIT
You can also clear kits while in the SAVE or LOAD KIT menus.
1. Select the kit you want to clear, hold down the [FUNCTION] key and press the [PLAY]
button. A message saying “CLEAR KIT” appears.
• It is also possible to undo this operation. To undo the action, hold the function
[FUNCTION] button and press the [PLAY] button. The message saying “UNDO
KIT” indicates that the clear operation has been undone.
KIT ASSEMBLY
To assemble a kit, you need to select and assign your machines for each track. First open
the KIT window by pressing the [KIT] key.