Elektron Machinedrum - Manual (Page 33)

THE ROUTING PAGE
25
THE ROUTING PAGE
The ROUTING page controls routing of the sound through the distortion, volume and pan,
to the effect buses and also basic LFO control.
To access the ROUTING page, press the [SYNTHESIS/EFFECTS/ROUTING] key until the
LED is lit. The rightmost text of the machine information area at the bottom
left will show “ROUT” for routing. The routing parameters for the active track are now con-
trolled by the DATA ENTRY knobs.
DISTORTION
The distortion is applied after the TRACK EFFECTS but before volume and pan.
The DIST parameter controls the signal overload distortion.
VOLUME
This volume control is separate from the LEV overall gain control. You can control track
volume by parameter locks or by using the LFO system. The ACCENT feature can also be
used to affect volume of a track.
VOL controls the volume of the track
See section “LOW FREQUENCY OSCILLATORS (LFO’s)”, on page 32 for more informa-
tion on LFO’s.
See section “PARAMETER LOCKS”, on page 12 for more information on parameter locks.
See section “ACCENT TRACK”, on page 45 for more information on the accent feature.