Elektron Machinedrum User Manual
Page 41
LOW FREQUENCY OSCILLATORS (LFO’s)
33
DEPTH controls how much the LFO will affect the sound.
SHMIX is a balance control. When set to zero the LFO only uses the SHP1 waveform as
modulation. At its maximum, only modulation by the SHP2 waveform is used.
Below is an illustration showing the behaviour of the waveforms of the LFO’s when set to
the different UPDTE options.
•
As the LFO settings are stored in the kit, it is important to save the kit if you wish
to keep the changes.
•
The SPEED, DEPTH and SHMIX parameters are also available from the ROUTING
page. As the parameters of the ROUTING page can be controlled by parameter
locks and even by other LFO’s, this can be a source for highly advanced LFO set-
ups.