Elektron Analog Rytm - Manual (Page 70)

SETUP EXAMPLES
62
ANALOG RYTM WITH OTHER ELEKTRON GEAR
Analog Rytm gets along with other broods of the Elektron breed. Here, it is used with an Octatrack and an
Analog Keys.
In this example, the Analog Rytm creates the beats. The Analog Keys is used for bass and synth sounds. The
Octatrack plays back loops and samples the audio from the Analog Rytm and the Analog Keys.
1. Connect the Analog Rytm main outputs to the Analog Keys inputs, the Analog Keys main outputs to one of
the input pairs of the Octatrack, and the main outputs of the Octatrack to the PA. Use standard phone con-
nectors.
2. Make sure the Analog machines are MIDI slaved to the Octatrack using two standard MIDI cables.
3. On the MIDI configuration menu, found in the GLOBAL menu on the Analog Rytm, ensure the MIDI SYNC
has CLOCK RECEIVE and PROG CH RECEIVE activated.
4. On the MIDI PORT CONFIGURATION menu, also in the GLOBAL menu, use the setting MIDI or
MIDI+USB for the input port.
5. Use the internal effects of the Analog Keys on the incoming signal from the Analog Rytm. Make a perfor-
mance macro on the Analog Keys controlling the desired FX parameters.
Trk 1
Master
Volume Level
Tempo Tap Sound Selection
Bank Group Direct Change
Song Edit
Mode
Trig Mute Accent Note
Slide Parameter Slide
Chain New
Perf Setup
Page Scale
A B C D E
F G H I J
Arp Setup Note Setup Osc 1 Ext In CV A
Osc 2
CV B
Filters Chorus CV C
Amp Delay CV D
Env Reverb Env
LFO LFO LFO
Copy Clear Paste
Transpose Lock 1:4 2:4 3:4 4:4
Mute
Yes/Save
No/Reload
Multi Map Edit Poly Edit
Octave
Down Up
Transpose As Seq
I Function
- +
Headphones Left Right Trk 1 Trk 2 Trk 3 Trk 4 In Left In Right CV AB MIDI In MIDI Out Sync A MIDI Thru Sync B USB AC In Power CV CD
Trk 2 Mute
Trk 3 Mute
Trk 4 Mute
FX Mute
CV Mute
MAIN OUT TO MIXER