Elektron Analog Rytm - Manual (Page 62)

GLOBAL MENU
54
TRACK ROUTING
In this menu you can customize track routing. Use [ARROW] keys [UP] and [DOWN] to highlight one of the two
options.
ROUTE TO MAIN highlight this option to customize which of the 12 tracks will send to the
main output. Use the [PADS] to activate/deactivate send from the track of each corresponding
pad. of a green color send to main. Unlit do not. Note that each track will
still send to its individual output.
ROUTE TO FX highlight this option to customize the FX routing of the 12 tracks. Use the
[PADS] to activate/deactivate each corresponding track for routing through the FX.
of a yellow color route to FX. Unlit do not.
SYSEX DUMP
In the SYSEX DUMP menu, kits, Sounds, patterns, songs and global slots can be sent and received. Note that
Sample transfer is handled exclusively via the SAMPLES menu (see above). Select a menu option using [UP]/
[DOWN] or the LEVEL knob. Press [YES/SAVE] to open the highlighted menu selection.
When receiving or sending SysEx data, the MIDI ports or the USB port of Analog Rytm must be connected to
the external sending/receiving device.
• If the Analog Rytm sends or receives SysEx data through the MIDI ports, use the Elektron TM-1
USB MIDI interface for up to 10x transfer speeds.
• If the external device is a computer, we recommend using our free SysEx utility C6, which can be
downloaded from the Elektron website.
SYSEX SEND
Here kits, Sounds, patterns, songs and global slots can be sent to an external device via the MIDI OUT port or
the USB port of Analog Rytm.
The column to the left selects what will be backed up. Select the column using the [LEFT] arrow key. Use the
[UP]/[DOWN] keys or the LEVEL knob to scroll through the column. The SysEx data send alternatives located