COP-USA DVR2304SE-B User Manual
Page 64
Digital Video Recorder User Manual
58
Screen Display Mode:
Clicking the
icon beside the screen display mode, channel select dialog will appear as below:
Take 16-channel DVR for example: user can checkmark channels form 1-ch to 16-ch at random to display
the live pictures, 8 channels can be selected at most. Then click OK button to confirm the setting.
Snap Pictures
Fig 7-3 Channel Select Dialog
Click “Snap”
icon, the system will automatically capture pictures and save those pictures in the computer.
User should set up the save path for those picture in the Remote Preview interfaceConfigurationLocal configuration.
Color Adjustment:
Drag the slide bar to adjust Brightness, Contrast, Hue and Saturation. Click Default to reset them to original value.
Buttons
Description
Drag the scroll bar to adjust the brightness of channel
Drag the scroll bar to adjust the contrast of channel
Drag the scroll bar to adjust the saturation of channel
Drag the scroll bar to adjust the hue of channel
Click this button to recover the default value of brightness,
contrast, saturation and hue.
Save the adjustment
PTZ Control
Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is supported by the device and set the
relative parameters manually. User can control the dome up, down, right, left or stop rotating on Control Center, adjust rotation speed, Iris
and zoom, focus on the dome, and set the presets, etc.