COP-USA DVR2304SE-B - Manual (Page 33)

Digital Video Recorder User Manual
27
4.4.2 Motion
This tab allows to setup schedule for motion based recording.
Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 4-17:
Step2: The setup steps for schedule for motion based recording are similar to
normal schedule setup. You can refer to 4.4.1 Schedule for details.
Note: The default schedule of motion based recording is 24x7, that is, the
color of schedule settings interface is dark blue. This enables motion based
recording for 24x7. If you want to activate motion based recording, you must
enable motion alarm and setup schedule for motion alarm (Refer to Chapter
4.5.2 Motion Alarm for more details).
Fig 4-17 Schedule Configuration-Motion
4.4.3 Sensor
This tab allows to setup schedule for sensor based recording.
Step1: Enter into MenuSetupScheduleSensor tab. Refer to Fig 4-18:
Step2: The setup steps for schedule for sensor based recording are similar to
normal schedule setup (Refer to 4.4.1 Schedule for details).
Note: The default schedule of sensor based recording is 24x7, that is, the
color of schedule settings interface is dark blue. This enables sensor based
recording for 24x7. If you want to activate sensor based recording, you must
enable sensor alarm and setup schedule for sensor alarm (Refer to Chapter
4.5.1 for more details).
Fig 4-18 schedule configuration-sensor
4.5 Alarm configuration
Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.