COP-USA DVR2304SE-B - Manual (Page 20)

Digital Video Recorder User Manual
14
3 Basic Function Instruction
3.1 Startup & Shutdown
Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding
the life of your DVR.
3.1.1 Startup
Step1: Connect with the source power.
Step2: The device will boot and the power LED would turn blue.
Step3 A WIZZARD window will pop up and show some information about time zone
，time setup，network configuration, record
configuration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters. If users
don‟t want to setup Wizard, please click Exit button to exit.
Notice: This serial device can only display menu on VGA/HDMI monitor or BNC monitor at one time. If there is live image display
without menu display, please check up whether other device has menu display firstly, or long press ESC/Stop key to wait for login dialog
box to appear. Long press ESC/Stop key can switch the output between BNC and VGA/HDMI.
3.1.2 Shutdown
You can shut down the device by using IR remote controller and mouse.
By IR remote controller:
Step1: Press Power button. This will take you to see a shutdown window. The unit will shut down by clicking “OK” button.
Step2: Disconnect the power.
By mouse:
Step1: Enter into Menu and select “Shut Down” icon. This will let you see a shutdown window.