COP-USA DVR2304SE-B - Manual (Page 28)

Digital Video Recorder User Manual
22
4.2.3 Spot
Step1: Enter into MenuSetupLiveSpot tab. Refer to Fig 4-9:
Step2: Select split mode: 1×1 and map the channel
Step3: Set the dwell time.
Step4: Select the split mode and then setup current picture group. Click
button to setup the previous channel groups of dwell picture. Click
button to set the latter channel groups of dwell picture.
Step5: Click “Apply” button to save the setting; click “Exit” button to exit
the current interface.
Fig 4-9 Live Configuration-Spot
4.2.4 Mask
User can setup private mask area on the live image picture, max threes areas.
Setup mask area: Click Setting button, enter into live image to press left mouse and drag mouse to set mask area. Please refer to the left
picture. Right click to exit. Click Apply button to save settings.
Delete mask area: Select a certain mask area and double click to delete that mask area. Then click Apply button to save the setting.
Each channel is allowed to set 3 mask areas.
Fig 4-10 Live Configuration-Mask Setup Mask Area Live Image Mask Area