COP-USA NVMS 5000 User Manual
Page 34
NVMS-5000
User manual
34
If you want to delete the set schedule, please choose the schedule and click ‘Remove’ button to delete it.
4.6.4 Sensor Alarm Schedule Setting
Click
icon to return to the configuration interface of the alarm server. Select “Sensor Alarm Schedule
Setting’ button and do the relevant settings. Please refer to Chapter 4.6 Motion Alarm Schedule Setting for more
details.
Note: If no motion alarm schedule or sensor alarm schedule is set up, the default schedule (7×24) will be used.
4.6.5 Start Alarm Server
Double click
icon (or click ‘Start’
ÆProgramsÆNVMS-5000ÆServerÆAlarm Server) to run alarm
server. A login window will pop up as follows. Please input the above mentioned alarm server name and password (If
no modification is made, the default name is AlarmServer and the password is null). Then click ‘Setup’ button to input
the information of the authentication server (please refer to Chapter 4.2 Config Client for more details).
After that, please click ‘Login’ button to login to the alarm server. The alarm server interface is as follows.