COP-USA NVMS 5000 - Manual (Page 28)

NVMS-5000 User manual
28
The storage server interface displays as below.
Partition Status: Check the information of disks. Click ‘Refresh’ button to refresh disk information.
Format the Disk ˖ ˖You can format disks. Before formatting, you shall click ‘stop service” to stop the service of
storage server first. You should input the password of this server when you stop or start service. Then select the disk to
format. Finally, click ‘Format’ button.
Note: The disk cannot be set to record partition before formatting.
Recording Status ˖Check whether the device is online or not and view the record type. The record type includes
schedule record, sensor alarm record and motion alarm record. These records will display after the schedule is set.