beautypg.com

COP-USA NVMS 5000 User Manual

Page 21

background image

NVMS-5000

User manual

21

Select area and media server and input device name, device number, channel count, sensor count and alarm out

count. You also need to configure the network of the device before the auto report takes effect (Please see the

network configuration chapter of the device user manual for the detail configuration).

After adding the device, return to the device configuration interface. Now you can see the information of the

device listed as below.

To modify the device name, password, IP address, Port and the media server of the device, please select the

device and click ‘Modify’ button. To delete this device, please select the device and click ‘Delete’ button.

If the video signals connected to this software are more than 300 channels, you shall register. The system will

support to add the third-party device after registration. Please refer to the below picture. Here you can choose to add
other device Type 1 or other device type 2.