COP-USA NVMS 5000 - Manual (Page 15)

NVMS-5000 User manual
15
reboot.
4.2 Config Client
Config Client can configure all resource approved by Authentication Server, including devices, users, media
servers, storage servers, alarm server and TV walls. After starting the authentication server, please run Config Client to
create servers, add front-end devices and configure the whole system.
Double click icon (or click ‘Start’
Æ ProgramsÆNVMS-5000ÆClientÆConfig Client) to run Config
Client. A login window will pop up as shown below. Please input the username and password. The default username is
admin and the default password is admin . Then you should setup the IP address and port of the authentication server
at the first time. Please click ‘Setup” to pop up a window.
Then click ‘New” (Here we will introduce two ways to input).
z You can self-define the name. If the authentication server runs in the PC which the authentication server is
installed, you can input your LAN IP address (Double click ‘My Network Places’
Æ click ’View network connection’
under the field of Network Tasks
Æright click ‘Local area connection’Æselect ‘Properties’Æchoose ‘Internet
protocol(TCP/IP)
Æclick ‘Properties’ button to see). The default port is 6003 (If it is modified, please input the
modified port).