ChemoMetec SP-100 - Manual (Page 56)

6 Description of a typical Analysis Procedure (Total Count)
38
6. After approx. 30 seconds, the analysis is completed, and the result (in millions
per ml) is shown on the LCD-display (see Figure 67 ) and on the PC (in
SemenView ) if such is connected.
Figure Figure Figure Figure 67 67 67 67.... Result of the analysis shown on the LCD display
7. Open the lid, remove and dispose of the cassette. Place the lid on the used
sample cup and dispose of this, too. The NucleoCounter SP-100 system is ready
for a new analysis.
Remember - samples obtained from the
sperm cell material must be representative
Dispose of the SP1-Cassette and the sample
cup with its content according to national and
local laws/regulations regarding the nature
of the mixture it contains