ChemoMetec SP-100 - Manual (Page 51)

5 Operation of NucleoCounter SP-100
33
Display Text Type 32
1:Total 1:Total 1:Total 1:Total
2:Non 2:Non 2:Non 2:Non- - - -viable viable viable viable
Figure 62. Use the “1” and “2” buttoons to choose a “Total Count” or a “Non-Viable
count”. When “ 1” and “2” is activated the instrument will automatically
initiate the “ Run” routine. The “Run” routine takes about 30 seconds for a
Total Count and approximately 60 seconds for a Non-Viable Count.
5.19 Overview of Functions
Function Name Comment
F0 Dilution Factor Abbreviated DF, or DF1 and DF2 in the viability mode
F10 Correction Factor Abbreviated CF
F11 Animal Species Only available with instrument SW version 1.24 or higher
F30 Reset Counter Only relevant with printer connected to printer port
F31 Viability Mode Only relevant if viability option is supplied with the instrument
F32 Retest result
F50 Zero Count Check
F100 Instrument Info
F200 Setting Date Only relevant with printer connected to printer port
F201 Setting Time Only relevant with printer connected to printer port
F210 Language
F220 LCD contrast
F310 Print -> PC Only relevant with printer/PC connected to RS-232 printer port