BUCHI NIRCal - Manual (Page 259)

Chemometrics
NIRCal 5.5 Manual, Version A 259
3.21.25 Plot Defaults
The Nircal Configuration dialog will be opened. The default parameters for all views can be edited in
that dialog. See also
2D-Plots .
3.21.26 Plot Settings
The titles and zoom of a plot can be edited before printing.
3.21.27 Regression Draw Line
A regression line will be drawn for each set that you activate here. The corresponding regression
formula will be displayed as a legend.
3.21.28 Regression Copy Equation
The regression formula will be copied to the clipboard and can be pasted to any text or spreadsheet
application.
3.21.29 Remove Selection from
Add the objects currently selected in the plot to the chosen set.
NOTE
This action will change the contents of your validation or calibration set if you copy data to these sets.
3.21.30 Snap to Y-Grid
The scale of the y axis is adjusted in such a way, that the upper and lower corners are labeled.
The default for this value can be set in the 2D-plot Tab of the Nircal Configuration Dialog.
3.21.31 Snap to X-Grid
The scale of the x axis is adjusted in such a way, that the left and right corners are labeled.
The default for this value can be set in the 2D-plot Tab of the Nircal Configuration Dialog.