BUCHI NIRCal User Manual
Page 211
Chemometrics
NIRCal 5.5 Manual, Version A
211
The selected topics will be documented in the project journal. It is an important feature for the audit
trail, therefore the selection should be done carefully.
NOTE
The small buttons on the top right of a frame resets all values of the frame to the default setting.
NOTE
This feature was used in the file-mode. In database mode there is as System Logger in the
Administrative Tools of the NIRWare Management Console.
NOTE
At the beginning of the calibration phase, it is suggested to deactivate all entries
using the “Reset
all” button, then activate Error and Warning. After the validation, activate all filters by clicking on the
small box on the top right corner.