BUCHI Encapsulator B-395 Pro - Manual (Page 32)

5 Putting into operation
32 B-395 Pro Operation Manual, Version C
5 .5 .3 Installation of the pressure bottle
1. Assemble and – if needed - autoclave the
pressure bottle.
2. Fill the bottle with the immobilization mixture.
3. Attach the silicone tube of the pressure bottle
to the luer lock inlet of the bead producing
unit.
4. Pass the silicone tube in the liquid regulating
flow valve. Squeeze it so that no liquid can
pass.
5. Insert the nipple g of the air tube into the
quick coupling of the air outlet at the control
unit.
Figure 5-18: Installed pressure bottle