Panasonic KX-P3626 - Manual (Page 61)

Printing Area
Fanfold Paper
o
o
o
o
o
o
o
o
o
o
o
o
ko
o
o
o
o
o
o
o
o
o
1st character
Printing area
Paper perforations
Printing area
I A
Push Pull
A 1" (25.4 mm)
B 0.7^^ (17.8 mm)
C 0.33" (8.38 mm) 5.7" (144.8 mm)
D 1"(25.4 mm)
A: Value A indicates the area near the paper perlorations where
the quality may not be optimum.
B: Value B indicates the minimum distance between the sprock­
ets and first printable character. (When the left tractor is set
on the left end and the margin is set to 0.)
C: Value C indicates the area from the top edge of the paper to
the top of the first printed character.
D: Value D indicates the position where paper out is detected
and printing may not be optimum.
Single Sheet and Envelope
1
St
character
Single Sheet and Envelope
Tc B 1.5" (38 mm)
C 0.33" (8.38 mm)
D 1"(25.4 mm)
Printing area
B: Value B indicates the minimum distance between the edge
of the paper and the first printable character. (When the left
paper guide is set to the left end and the margin is set to 0.)
C: Value C indicates the area from the top edge of the paper to
the top of the first printed character,
D: Value D indicates the position where paper out is detected
and printing may not be optimum. (When printing on enve­
lopes, do not print on area where edges overlap. Print quality
may not be optimum.)
61