Press, Press fenter), P press any key to return to the ^ main screen – Panasonic KX-P3626 User Manual
Page 34: Ikfitial, Print settings, Display setting list, O press, Sqofl[p (mséfe, A print setting window will be displayed, The setting list will be displayed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
iKfitial
©SQOfl[p (Mséfe
Print Settings
Before you change any selections on the Setup Disk, you can verify the settings by getting a printout.
^ Press
A Print Setting window will be displayed.
O Press [
y
] or [
n
] , or highlight
^ the appropriate command and
press fEnter).
“Y”: Current print settings will
be printed.
“N”: The print settings won’t be
printed and the display will
return to the Main screen.
■ ; = < Manu >
IT PRINT STYLE
* EMULATION
* PAGE FORMAT
* PRINT MODE
* TEXT ENHANCEMENT
* CHARACTER SET
* INSTALL
* INTERFACE
* T.O.F. SETTING
« Setup Utility (XXXXXXXXXX) »
r^< Item >-----------------
FONT
PITCH
«
COMMENT
»
Selea prim style.
PRINT SETTING
— Option -
INTERFACE
PORT
: PARALLEL
: LPT1:
Are you sure ?
RYl'YeTi l N ] N o
« KEY OPERATION >>
■
[Ft.HELP]
[F3.SAVETODISK] (F5=PRINT SETTING] [F6-LIST1
¡F2.FACTORY SETTING] ¡F4=LOAD FROM DISK] (F10=SEND TO PRINTER] [ESC-EXIT]
C
W
S'
(O
(D
CO
(D
C
■o
Hi
7T
Note:
• When sending the data by serial interface, change the option items on the display to the required
setting, (ex; INTERFACE)
1. After pressing (F51 . press (J) to highlight PARALLEL.
2. Press [Enter].
3. Press (J) until SERIAL is highlighted.
4. Press [Enter] .
Three items {BAUD RATE, PARITY and DATA LENGTH) will be added to the PRINT SETTING
window.
You may need to change the settings of additional options, without pressing again repeat
steps 1-4.
Display Setting List
Before you change any selections on the Setup Disk, you can view the current setting list on the display.
1
Press
The setting list will be displayed.
p Press any key to return to the
^ Main screen.
34
FONT
Draft
AGNIIBM
OFF
PITCH
10 CPI
AUTO CRftBM
OFF
EMULATION
EPSON
AUTO LF
OFF
LINE/INCH
6 LPI
BUZZER
ON
PAGE LENGTH
11 inch
AUTO LOADING
ON
TOP MARGIN
0.0 inch
PAPER OLfT DETECT
ON
BOnOM MARGIN
0.0 inch
SUPER QUIET MODE
OFF
LEH MARGIN
0 column
REVERSE LFlPULL
OFF
RIGHT MARGIN
136 column
TEAR OFF
MANUAL
CTR PRINTHEAD
40 column
CSF MODE
OFF
GRAPHIC DIRECTION
UNI DIRECTION
DOWNLOAD
OFF
TEXT DIRECTION
Bl DIRECTION
AUTO ON LINE
ON
PRINT WIDTH
13.6 inch
INTERFACE
PARALLEL
Bao
OFF
DATA LENGTH
8 BITS
DOUBLE HIGH
OFF
BAUD RATE
960CBPS
DOUBLE STRIKE
OFF
PARRY
NONE
DOUBLE WIDE
OFF
PROTOCa
OTR
Exit: Press any key.