Examples, Note, Y]©döig) ©®ooimi lf>gi(iii – Panasonic KX-P3626 User Manual
Page 40: Selecting a character font, Selecting a character pitch, Press and release [ font, Press and release ( pitch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(y]©Döig) ©®ooiMI lF>gi(iii®
Selecting a Character Font
• Press and release [ FONT ]
This printer contains resident fonts which are accessible through the Control Panel.
You can select any one of the character fonts by pressing the FONT switch on the Control Panel.
The combination of FONT indicators indicates the current character font selected, as shown below.
EXAMPLES
FONT
=PR0GRAM
• •
FONT
=Bold PS
• •
FONT
FONT
=Courier
• o
FONT
•
•
FONT
FONT
= Pres t i ge
o Ü
FONT
=Roman
=Sans Serif
=0CR-B
• =light is lit
o=light is out
• =light is blinking
■0
fi)
3
o
Note:
'
• When the power is turned off, font will reset to default setting. If you want to save a font selection as 1
your default, you may do so by using the Setup Disk. (cs* p. 28)
• You must be in PROGRAM {both FONT indicators are off) to allow your software to control your font
selection.
Selecting a Character Pitch
Press and release ( PITCH ]
This printer contains resident pitches which are accessible through the Control Panel.
You can select any one of the character pitches by pressing the PITCH switch on the Control Panel.
The combination of PITCH indicators indicates the current character pitch selected, as shown on the
next page.
40