Setting the printer setup mode, To enter the initial setup mode, While pressing [ load/park ] , turn the power on – Panasonic KX-P3626 User Manual
Page 47: Selecting the item press and release [ font, Initial setup mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(lMA©®i©©®0^
Initial Setup Mode
The following features (items) can be set in the Initial Setup mode through the Control Panel;
Emulation, Auto Line Feed, Graphic Direction, Page Length and the optional Cut Sheet Feeder Mode,
if optional KX-P38 is installed. These features can also be set using the Setup Disk.
(US’ P. 28)
Setting the Printer Setup Mode
1
Load a sheet of paper (
p 1
6
-
24
),
and
turn the power off.
^ To enter the Initial Setup mode
While pressing [ LOAD/PARK ] , turn the
power on.
Both FONT indicators and the Super Quiet indicator
will be blinking.
The current settings will be printed automatically.
^ Selecting the Item
Press and release [ FONT ].
Each time you press [ FONT) , you will advance to
the next item. Select the desired item according to
the status of the FONT indicators (on, off, blinking).
(cs= P.48)
^ Setting the Item’s status
Press and release [ PITCH 1.
The item’s status will change each time you
press [PITCH] . (I®' P. 48)
To change additional settings, repeat steps 3 and 4.
C
5*
(Q
(D
o
O
3
o
■0
fi)
3
(D
47