Cleaning the printer, Outside of the printer, Turn the power off – Panasonic KX-P6100 User Manual

Page 31: Inside of the printer, Inside-of the printer, 6 care and maintenance, Chapter

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter

6 Care and Maintenance

Cleaning the Printer

Periodic cleaning of the printer is recommended. The frequency of cleaning is dependent upon the environment. You

shouid clean the printer.

• at least once a month.

• when you install a new Process Unit.

• when print quality has deteriorated.

Outside of the Printer

Turn the power OFF.

2 Clean the cover with a soft cloth.

Use any mild commercial cleaner.

Caution:

• Do not use benzine, thinner, aerosol cleaners,

or any abrasive powder to clean the cabinet.

Inside of the Printer

^ Turn the power OFF.

Before cleaning the inside of the printer, allow

the fuser to cool (about 5 minutes).

2 Open the left cover.

Clean the following areas with a dry cloth or
a cotton swab.

With a dry cloth

• Pinch roller

• Feed roller

• Transfer roller

• Paper chute (Paper dust)

With a cotton swab

• Carefully wipe the tungsten wire by sliding a

cotton swab from end to end 4 to 5 times.

Pinch roller

Transfer roller

Feed roller

Tungsten wire

Cautions:

• The printer must be turned OFF prior to

cleaning.

• Do not expose the process unit to tight

for more than 5 minutes.

• Do not touch the green drum surface.

^ Close

the left cover.