Enter the desired remote control id code – Yamaha RX-V1065 User Manual

Page 68

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced setup

Enter the desired remote control ID code.

To switch to IDl:
Press

OUNumeric keys

to enter “5019”.

To switch to ID2:
Press

OUNumeric keys

to enter “5020”.

Once the remote control code is registered,

Q3TRANSMIT

blinks twice.

If it fails,

QITRANSMIT

blinks six times. Repeat

from step 1.

It you inilializc the settings of this tinit. "REMOTE ID" (remote eontrol
eode of this unit) is set to "IDl".

65 En