Yamaha RX-V1065 - Manual (Page 33)

FM/AM tuning
iif)'.
• You can select the preset number at which the preset starts by
pressing djPRESET Д / V oi* QlCursor Д / V while '"READY"
is displayed on the front panel display.
• To cancel registration, press OlRETURN.
Status
Preset number Frequency
During the automatic station preset, “MEMORY”
appears in the front panel display each time a station
is registered.
When registration is complete, “FINISH” appears
and then the display returns to the Option menu.
To return the display to the original state, press
nOPTION
Registering stations by manual station
preset
You can manually register FM stations with weak signals
or AM stations.
1
Tune in to the desired station (page 29).
• (U.S.A. model only)
To register a sub-audio program of the HD Radio station (HD2 lo
HD8). press dPRG SELECT lo select the desired audio
program.
2 Press ©MEMORY (or [SMEMORY).
“Manual Preset” appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
• By holding down (DMEMORY (or [HMEMORY) for more lhan
2 seconds, you can skip ihe following steps and aulomatically
register the selected station to an empty preset number (next lo the
lastly-registered preset number).
3 Press ©PRESET (or HPRESETA/V)
to select the preset number to which the
station will be registered.
When you select a preset number to which no station
is registered, “Empty” appears. When you select a
preset number to which any station has been already
registered, the frequency of the station is displayed.
Frequency to be registered
4
Press
©MEMORY
(or
[SMEMORY).
When registration is complete, the display returns to
the original state.
All)''
• To cancel registration, press OlRETURN or leave this unit
without any operations for about 30 seconds.
Calling a preset station (Preset tuning)
You can call preset stations registered by automatic station
preset or manual station preset.
Press
©PRESET
(or I
select a preset number.
OPRESETA/V) to
• Preset numbers lo which no stations arc registered arc skipped.
• "No Presets" or "No Presets in Memory" is displayed if no slalions arc
registered.
• You can directly select a preset number by pressing HHNumeric keys
while calling a preset slalion. "Empty" appears on the display if you
enter a preset number to which no slalion is registered. "Wrong Niim."
appears if you enter an invalid number.
• When you press [UNumeric keys during normal tuning, a frequency
is entered. Set tuning mode to preset lulling mode using ©PRESET <3
/ D> (or djPRESET AW) pi'ior lo the operation.
• (U.S.A. model only)
This unit may take a little time to call a sub-audio program of an HD
Radio station.
Clearing preset stations
1
Rotate the
©INPUT
selector (or press
BITUNER)
to select “TUNER” as the input
source.
2
Press
01OPTION
on the remote control.
The Option menu for “TUNER” is displayed
(page 47).
3
Press HCursor A
/
V
to select “Clear Preset”
and then press
QIENTER.
Flashes Status of the selected preset number
Preset
number
Preset number
A e I)''-
• To cancel the operation and return to the Option menu, press
DRETURN
Press HCursor A / V to select a preset
number to reset and then press QIENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat step 4.
To exit the Option menu, press
QIOPTION. •
• You can also select a preset number using the HjNumeric
keys.
30 En