Yamaha RX-V1065 - Manual (Page 58)

1 Operating various settings for this unit (Setup menu) \
Menu/Submenu Function Page
DSP Parameter Sets parameters for the sound field programs. 60
Memory Guard Protects some settings against accidental alteration. 60
The Setup menu screen appears on both the GUI screen
and front panel display.
GUI screen
Speaker Setup f
Sound Setup :
Function Setup i
DSP Parameter :
Memory Guard i
Press HCursor A /V to select an item to edit
and then press HCursor <1 / o to change
the setting.
Some items in “Manual Setup” of “Speaker Setup”
take up a full screen. To display other items in
“Manual Setup”, press HCursor
A
/
V-
Example (Speaker Configuration)
Speaker Contiguration
Front Speaker
Front panel display
In this section, procedures of setting menus using the
video monitor are described.
1
Press [SON SCREEN on the remote control.
The GUI screen appears on the video monitor.
2
Press HCursor V to select “Setup” and then
press QIENTER.
The Setup menu appears on the video monitor.
3
Press HCursor
A
/
V
to select the desired
menu then press QIENTER.
Items of the selected menu are displayed.
Example (Function Setup)
• To rcUirii to ihc previous menu, press [HRETURN.
4
If necessary, press HCursor
A
/
V
to select
the desired submenu then press QIENTER.
Example (Volume)
Volume
Adaptive DRC i <0ff>
• To configure other ilems. repeat step 5.
6 To turn off the GUI screen, press [SON
SCREEN.
Note
* In case mCursor /SJ / <] /or other keys do not work al'lcr
closiiig the Option menu, press [
select the current input source a; Minput selection key i<<
You can set various items for speakers. Two kinds of
adjustments are available. One is “Auto Setup” (YPAO)
for automatic adjustment and another is “Manual Setup”
for manual adjustment.
CEf)''
• The default settings arc marked with
Auto Setup
Automatically adjusts output characteristics of speakers to
obtain optimum balance for the output sound based on
positions and performances of the speakers and acoustic
characteristics or the room, which are automatically
measured. For details on operations, see page 19.
Manual Setup
Adjusts output characteristics of speakers based on
manually set parameters.
After “Auto Setup” (YPAO) is performed, you can check
automatically adjusted parameters in the “Manual Setup”
menu. Fine adjust the parameters for your preference if
necessary.
■ Speaker Configuration
Sets speaker configurations, such as connection status of
speaker and a size of the connected speaker (sound
reproduction capacity), suitable for the listening
environment.
55 En