Yamaha RX-V1065 - Manual (Page 66)

Controlling other components with the remote control
You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
[ISOURCE POWER
Turns on and off an external component.
QlCursor, ENTER, RETURN
Operates the menus of external components.
QH External component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
OUNumeric keys
Function as numeric keys of an external component.
01TV control keys
Input source Category Manufacturer
Default
code
|USB| — — —
IDOCK] DOCK Yamaha 5011
1 TUNER] Tuner Yamaha 5007
jSIRIUS] Tuner Yamaha 5017
jXM] Tuner Yamaha 5009
[MULTI] — — —
INPUT Switches visual inputs of TV
MUTE Mutes audio of TV
TV VOL +/- Controls the volume of TV
TV CH +/- Switches channels of TV
POWER Turns on and off TV
UDISPLAY
Switches between the screens of external components.
• You can use IMITV control keys only for controls of TV regardless
ofsclcclcd input sources.
• You need lo set the remote control code first lo conlrol external
components.
• The remote control keys lor controlling external components are
available only when the external components have corresponding control
keys.
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
■ Default remote control code settings
Input source Category Manufacturer
Default
code
IHDMI 1] Blu-ray Disc Yamaha 2018
IHDMI 2] — — —
IHDMI 3] — — —
IHDMI 4] — — —
|AV 1] — — —
]AV2] — — —
IAV3] CD Yamaha 5013
|AV4] — — —
]AV5] — — —
|AV6] — — —
[AUDIO 1] — — —
[AUDIO 2] — — —
IV-AUX] — — —
[PHONO] — — —
indicates no assignment
An external component controlled by the remote control is automatically
selected according to selection of the scenes (page 22).
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
You should perform each step within 1 minute after the
previous step.
1
Press HCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
miTRANSMIT blinks twice.
2
Press the desired [Slnput selection key.
3
Press OUNumeric keys to enter a remote
control code.
Once the remote control code is registered,
Q3TRANSMIT blinks twice. If it fails,
Q3TRANSMIT blinks six times. Repeat from
step I.
You can reset all remote control codes to the factory
default settings.
1
Press HCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
Q3TRANSMIT blinks twice.
2 Press [HON SCREEN.
3
Press OUNumeric keys to enter “9981 ”.
Once the initialization is complete, QITRANSMIT
blinks twice. If it fails, QITRANSMIT blinks six
times. Repeat from step 1.
63 En