Yamaha RX-V1065 - Manual (Page 38)

XM® Satellite Radio tuning (U.S.A. model only)
You can use this feature to store up to 40 XM Satellite
Radio channels. You can then recall any preset channel
easily by selecting the preset channel as described in
“Calling a preset channel (Preset Search mode)” on this
page.
Registering preset channels
1
Search a channel you want to set as a preset
channel in one of the XM Satellite Radio
search modes.
For details, see “XM Satellite Radio operations”
(page ,44).
. I l l I
I I L L
2
Press
©MEMORY
(or
[SMEMORY).
The indicator on the front panel display changes as
follows.
Currently registered channel number
(or ” If empty)
I |wf r I'/i
I tl_ M
Preset number to which new
channel number is registered
Channel number to be
registered
• By holding down ( e )MEMORY (or [UMEMORY) lor more than
2 seconds, yon can skip the Tollowing steps and aulomatically
register the selected channel to an empty preset number (next to the
lastly-registered preset number).
• To cancel the preset operation, press [HRETURN.
3 Press ©PRESET (or EIPRESET A/V)
to select the stored preset station number.
• You can also select a preset number using the (HjNumeric
keys.
• If you select a preset number being used (currently registered
channel number appears next to the preset number), the current
preset channel will he overwritten.
4
Press
©MEMORY
(or
[SMEMORY).
Calling a preset channel (Preset Search
mode)
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM channels. For details, see
“Registering preset channels” on this page.
Preset channel number
__________________________
Press
©PRESET
/ O (or
HPRESET A / V)
repeatedly to change the preset channel number
(1 to 40).
• You can directly select a preset number by pressing a QI] Numeric
keys while calling a preset channel.
Clearing preset channels
You can clear the assignments of preset XM Satellite
Radio channels.
1
Press
01OPTION
on the remote control.
The Option menu for “XM” is displayed.
2
Press
HCursor A / V repeatedly to select
“Clear Preset” and then press
HENTER.
3
Press
HCursor
A / V to select the preset
station number that you want to clear.
© L R ; p i
i f i f i H
Press
HENTER
to execute the clearing of
the selected preset channel.
To clear the registration of multiple preset numbers,
repeat steps .4 and 4. To end the operation, press
MOPTION
35 En