Syamaha, Rx-v1065, R)input – Yamaha RX-V1065 User Manual
Page 101: Siaudio 1, Siaudio 2), 01option, Qienter, Qioption, Additional feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYAMAHA
RX-V1065
Additional feature
Now you can select the video to be output when “AUDIOl” or “AUDI02” is selected as the input source.
For example, if you want to use an external component with analog audio and component video (or composite) output
jacks; connect the analog audio output jacks of the external component to the AUDIO I or AUDIO 2 jacks of this unit
while making a video connection (component video or composite).
Then follow the procedure below to select the video to be output when “AUDIOl” or “AUDI02” is selected as the input
source.
1
Rotate the
(R)INPUT
selector (or press
SIAUDIO 1
or
SIAUDIO 2)
to select
“AUDIOl” or “AUDI02” as the input source.
2
Press
01OPTION
on the remote control.
The Option menu for “AUDIOl” or “AUDI02” is
displayed.
3
Press HCursor
A
/
V
to select “Video Out”
and then press
QIENTER.
n I
I
I
L
Press HCursor <1 / O to select a video input
jack to be used when “AUDIOl” or “AUDI02”
is selected as the input source and then
press
QIENTER.
- AVI -2 (COMPONENT VIDEO)
- AV.3-6 (VIDEO)
- V-AUX (VIDEO)
- Off (no video output)
^1?)'
• "Off is sclcclcd by default.
5
To exit the Option menu, press
QIOPTION.