Yamaha RX-V1065 - Manual (Page 20)

Connections
■ Transmitting/receiving remote control signals
When the components have the capability of the
transmission of the remote control signals, connect the
REMOTE IN and REMOTE OUT jacks to the remote
control input and output jack with the monaural analog
mini cable as follows.
Connect a USB memory device or USB portable audio
player to the USB port on the front panel of this unit. Eor
information about USB storage devices supported by this
unit, see page 45.
Remote f
control out?
] Remote
' control in
Infrared signal
receiver or Yamaha
component
IR flasher or Yamaha
component
(CD or DVD player, etc.)
■ If connecting a Yamaha component that supports the SCENE control
signal reception to the REMOTE OUT jack of this unit, you can start
playback on the Yamaha component by using the SCENE lunction
(page 22).
■ If connecting a component other than Yamaha products to the REMOTE
OUT jack of this unit, set "'SCENE IR" to ""OFF" in the advanced setup
menu (page 64).
n
USB memory device or
USB portable audio player
Using the VIDEO AUX jacks
This unit has the DOCK terminal, to which you can
connect a Yamaha iPod universal dock (YDS-11, sold
separately) or a Bluetooth wireless audio receiver (YBA-
10, sold separately). You can play an iPod or a Bluetooth
component with this unit by connecting it to the DOCK
terminal.
Use a dedicated cable for connection between the dock/
receiver and this unit.
Use the VIDEO AUX jacks on the front panel to connect a
game console or a video camera to this unit. Be sure to
turn down the volume of this unit and other components
before making connections.
- g j O d )
Bluetooth wireless audio receiver
Game console or video
camera
17 £n