Note, Vtroperation menu – Panasonic AG-DP800HP User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VTROPERATION Menu
Underlining denotes the mode set as the default.
Viewfinder sub menu
item
Mode set
Functions
BACK SPACE
ON
Selects whether auto editing is to be performed.
(pre-edit shooting)
OFF
ON: Auto editing is performed.
OFF: Auto editing is not performed.
CUE-UP
ON
Selects whether auto cue-up is to be performed.
(program search)
OFF
ON: Auto cue-up is performed.
OFF: Auto cue-up is not performed.
HUMID OPE
DISABLE
Selects the VTR operation when condensation has formed.
(recording
ENABLE
DISABLE: When condensation has formed, all operations except Power
condensation)
switch ON/OFF and tape ejection are prohibited to protect the VTR
and its tape.
ENABLE: Even when condensation has formed, operations are accepted as
usual.
S-VHS REC
AUTO
AUTO: Tape format is automatically identified, and recording is performed in
VHS
Super VHS mode when S-VHS tape is employed.
VHS: Recording is forcibly performed in VHS mode.
26P CONTROL
OFF
OFF: No 26P VTR control. (Camera recorder only)
BOTH
BOTH: This unit and the 26P VTR are controlled at the same time (tally LED
ON
displays REC mode of camera recorder).
ON: Only the 26P VTR is controlled (tally LED displays REC mode of 26P
VTR).
To place camera recorder in REC or REC/PAUSE mode, press START/STOP
button while holding down the START button (see page 17).
5P REMOTE
ON
Sets 5P remote control ON or OFF.
OFF
ON: 5P remote control possible.
OFF: 5P remote control not possible.
Note:
“5P REMOTE” refers to signals which will be used at some future point in time.
BACK TALLY
ON
Selects whether back tally indicator (LED) is to light.
OFF
ON: Indicator lights.
OFF: Indicator does not light.
REC START
ALL
ALL: Accepts recording regardless of the VTR mode.
NORMAL
NORMAL: The operation of the VTR START/STOP button is accepted only
when the VTR is in the stop (power save), rec pause or still mode.
NOTE
“HUMID OPE ENABLE" is an extremely risky mode to set in that in this mode VTR operation is continued even if the condensa
tion sensor detects the formation of condensation inside the unit. Since in such a state the tape may wind itself around some of
the parts inside the VTR, this mode should be used only when recording is worth the risk. (The manufacturer will not be held liable
for any damage which may result from operation in this mode.)
64