Panasonic AG-DP800HP - Manual (Page 17)

START Button
MENU ON/OFF Selector
Switch
TC/UB/COUNTER Selector
Switch
Press this button to indicate the time code generator setting on the
display. The button is used to make the time code generator and
menu item settings.
OFF: The switch is normally kept at this position when the camera re­
corder is being operated.
ON: For displaying or changing a menu item.
REC/FREE Selector
Switch
TC:
UB:
COUNTER:
REC:
For setting or displaying the time code data.
For setting or displaying the user bit data.
For indicating the reei counter on the display.
For counting the time code only in the VTR’s recording mode;
REGEN operation is performed when LTC is ON (set using the
menu item).
FREE: For counting the time code in the same way as for the time regard­
less of the VTR mode.
17